Myntra label crop
How to Print Myntra Labels on a Thermal Printer
Fashion orders on Myntra are time-bound, and a label that will not scan can delay pickup. Printing on a thermal printer is the most reliable way to avoid that.
Follow these steps for clean labels.
Crop first
Drop the label PDF into the Myntra label crop tool so each label sits alone on a 4×6 page.
Set up the printer
- Create a 4×6 paper size in the driver.
- Select direct thermal mode.
- Calibrate the gap sensor.
Printer-specific tips
- TSC: use the Seagull driver and Auto Calibration.
- Zebra: set media type “Label with gaps” in ZDesigner.
- TVS: hold feed to calibrate after loading a roll.
- Xprinter: use the vendor utility to detect label gap.
Quality check before handover
Scan two or three labels with a phone barcode app. If they read instantly, the batch is good. If not, check darkness and scale settings before printing more.
Daily routine that saves time
- Download all Myntra labels for the day in one PDF.
- Crop them in one go and save the file with the date.
- Print a test label, then the batch.
- Pack in label order so nothing is missed.
Print at 100% with margins None. Check that the barcode spans most of the label width.
Frequently asked questions
Why does my label print sideways?
Turn on Auto-rotate or set orientation to portrait.
Can I print on A4?
Yes, choose A4 with 2 or 4 labels per page.
What darkness is best?
Medium; increase only if print is faded.
Can I print Myntra labels from a phone?
Yes, crop in the mobile browser and print via your printer’s app.
Do I need special label rolls?
Standard 4×6 direct thermal rolls work.
Can I crop Myntra labels with other marketplaces?
Yes, the Auto-detect tool handles mixed files.
Why is the barcode faint?
Raise darkness, lower speed and clean the printhead.